본문 바로가기

카테고리 없음

Audi Mmi 2g Firmware Update Download



Audi MMI 2G maps update is performed with a DVD stored navigation database. Maps update procedure is simple, does not require any diagnostic tools what so ever.

Tools

Did my mums car over the weekend. Updated her 3G Plus MMI system to FW version K942 & the latest 2017 maps version 6.24.2 You will need VCDS to clear the errors and code the adaptation for the errors which show up due to the system not being able to verify with the Audi servers. Took about 1 hour for the FW update and 1.5 hours for the maps. Firmware Versions. To see the latest firmware version available for your region click here. The Upgrade procedure. Unload your CD player of all disks. The Audi manual on this says that a backup power source should be connected to your battery, instead of this most people just leave the engine running.

  • Update DVD for your region, examples:
    • Europe DVD 2015: 4E0 060 884 DT
    • Russia DVD 2015: 4E0 060 884 EF
    • North America DVD 2015: 4E0 060 884 DS
    • Australia and New Zealand DVD 2014: 4E0 060 884 DQ

Warning!

Performing this procedure may cause permanent damage to your car.
Do this at your own risk!
We are not responsible for any loss or damage.

Preparation

  • Make sure that you have in you car Audi Multi Media Interface 2G (MMI 2G). Check details in article Audi navigation systems – MMI RNS BNS RMC differences.

Audi MMI 2G maps update

  1. Open your cars trunk and locate navigation DVD drive. It can be under the trunk floor or on the side, hidden behind trunk trim.
  2. Press “eject” and take out old navigation DVD.
  3. Insert new disk.
  4. Turn the ignition on and wait for the new disk to be recognized by Audi MMI 2G system.
  5. When asked (“New navigation software is available. Install?”), confirm that you want to update navigation database.
  6. Wait couple minutes for the software to be installed.
  7. When update is complete, press RETURN to reboot Audi MMI 2G system. Now your navigation maps are up to date.

Audi MMI 2G maps update is performed with a DVD stored navigation database. Maps update procedure is simple, does not require any diagnostic tools what so ever.

Tools

  • Update DVD for your region, examples:
    • Europe DVD 2015: 4E0 060 884 DT
    • Russia DVD 2015: 4E0 060 884 EF
    • North America DVD 2015: 4E0 060 884 DS
    • Australia and New Zealand DVD 2014: 4E0 060 884 DQ

Warning!

Performing this procedure may cause permanent damage to your car.
Do this at your own risk!
We are not responsible for any loss or damage.

Preparation

Firmware
  • Make sure that you have in you car Audi Multi Media Interface 2G (MMI 2G). Check details in article Audi navigation systems – MMI RNS BNS RMC differences.

Audi MMI 2G maps update

Audi Mmi Firmware Download

Audi mmi firmware update download

Audi Mmi Update Download

  1. Open your cars trunk and locate navigation DVD drive. It can be under the trunk floor or on the side, hidden behind trunk trim.
  2. Press “eject” and take out old navigation DVD.
  3. Insert new disk.
  4. Turn the ignition on and wait for the new disk to be recognized by Audi MMI 2G system.
  5. When asked (“New navigation software is available. Install?”), confirm that you want to update navigation database.
  6. Wait couple minutes for the software to be installed.
  7. When update is complete, press RETURN to reboot Audi MMI 2G system. Now your navigation maps are up to date.